2026 Hyundai Elantra and Tucson Hybrid Recall: Loss of Steering Control From Loose Fasteners
- Affected
- 2026 Hyundai Elantra; 2026 Hyundai Tucson Hybrid24 vehicles
- Hazard
- A loss of vehicle steering control increases the risk of a crash.
- What to do
- Dealers will inspect and replace the front strut assembly fasteners and perform a wheel alignment, as necessary, free of charge. Check whether your vehicle is included with its 17-character VIN.

Recall Facts (from NHTSA)
- NHTSA Campaign ID
- 26V692000
- Announced
- 2026-10-20
- Units affected
- 24
- Defect
- Hyundai Motor America (Hyundai) is recalling certain 2026 Tucson Hybrid and Elantra vehicles. The front strut assembly fasteners may not be tightened properly, which can result in a loss of vehicle steering control.
- Consequence
- A loss of vehicle steering control increases the risk of a crash.
- Remedy
- Dealers will inspect and replace the front strut assembly fasteners and perform a wheel alignment, as necessary, free of charge. Owner notification letters are expected to be mailed December 19, 2026. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 309. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on October 23, 2026.
A 2026 Hyundai Elantra or Tucson Hybrid built at Hyundai's Ulsan plant in South Korea may have left the line with front strut fasteners short of their specified torque. Those fasteners join the strut to the steering knuckle, and if they loosen, the suspension parts they hold together can partly or completely separate.
Hyundai filed NHTSA campaign 26V692000 on October 20, 2026, covering 24 vehicles: 20 Elantras built between December 30, 2025, and July 6, 2026, and four Tucson Hybrids built between January 21 and March 20, 2026. Hyundai's number is 309. Dealers will inspect both front struts and retighten the fasteners, replace hardware or align the wheels as needed, at no charge. Owner letters mail December 19, 2026.
Hyundai estimates that 10 percent of the population has the defect, which by my arithmetic is two or three cars. The same plant produced a second campaign filed that day, 26V693 on wheel lug nuts.
The Issue
On a MacPherson strut front end, the bottom of the strut bolts to the steering knuckle, the part that holds the wheel hub and turns with the steering. That joint sets the wheel's camber and transfers road load up into the strut. The fastener involved is a flange nut, Hyundai part 62618-4D000, from the Korean supplier Samjin Nut.
Hyundai traces the fault to assembly, and the remedy reuses the same nuts. Its cause statement reads "inadequate installation torque control of the front strut assembly." At Ulsan, operator error may have let one or more fasteners go on without sufficient torque, and the in-line torque measurement data meant to confirm each tightening was improperly recorded, so the check that should have flagged them missed them.
Affected Models
| Model | Model year | Production dates | Units |
|---|---|---|---|
| Hyundai Elantra | 2026 | Dec 30, 2025 - Jul 6, 2026 | 20 |
| Hyundai Tucson Hybrid | 2026 | Jan 21, 2026 - Mar 20, 2026 | 4 |
| Total | 24 |
Both models were assembled by Hyundai Motor Company in Ulsan for sale in the U.S. Hyundai added improved torque monitoring logic and new production sign-off requirements for strut installation, fully in place by September 9, 2026.
Chronology and Investigation
Hyundai's North America Safety Office received a field report on July 20, 2026, of suspension noise over road bumps on a 2026 Elantra, which Hyundai attributes to this condition, and opened an investigation. It reviewed its findings with Hyundai Motor Company on August 13, then surveyed a small group of potentially affected unsold cars through October 5 and found two with fastener torque below specification.
Between September 21 and October 5, Hyundai Motor Company reported what it had found in the Ulsan strut installation process: the operator error and the misrecorded torque data. Hyundai's safety decision committee chose a recall on October 13.
Reported Incidents
Hyundai knows of one U.S. incident, involving a 2026 Elantra on June 29, 2026, and of no crashes, fires or injuries from the condition.
Remedy and Notification
A Hyundai dealer will inspect the fasteners on both front struts and, where needed, retighten them, replace the associated hardware or perform a wheel alignment. The work is free whether or not the car is still under the New Vehicle Limited Warranty, and Hyundai will reimburse owners who already paid to have the condition repaired.
VINs became searchable on NHTSA.gov on October 23, 2026. Owner letters mail December 19, 2026, the same date Hyundai's filing gives for notifying dealers. Hyundai attached no do-not-drive or park-outside advisory. Its customer service line is 1-855-371-9460, and the recall number is 309.
Symptoms to Watch For Before the Strut Joint Fails
A knock from the front over bumps. The field report that opened the investigation described suspension noise over road bumps on an Elantra.
Vibration from the front suspension. Hyundai lists noise or vibration as the first warning a driver may notice.
The car pulling to one side. A strut that has shifted on the knuckle moves the wheel out of alignment, and Hyundai names pulling as the second warning.
How Long Will the Recall Repair Take?
Hyundai has not yet posted dealer instructions or a labor time for campaign 309. Confirming torque on two strut-to-knuckle joints is a short job with the front wheels off. A car whose fasteners have moved will also need an alignment, which adds time on the rack.
Bottom Line
The VIN check on NHTSA.gov has been live since October 23, nearly two months before the owner letters. A 2026 Elantra or Tucson Hybrid that knocks over bumps or pulls to one side should go to a Hyundai dealer now, with the VIN and recall number 309.
Find your Hyundai recall information: https://www.hyundaiusa.com/campaignhome
Historical context
Affected Vehicles
| Make | Model | Years |
|---|---|---|
| Hyundai | Elantra | 2026 |
| Hyundai | Tucson Hybrid | 2026 |