2026 Hyundai Recall: Wheel May Detach
- Affected
- 2026 Hyundai Venue; 2026 Hyundai Elantra; 2026 Hyundai Elantra Hybrid; 1 more17 vehicles
- Hazard
- Wheel detachment can cause a loss of vehicle control or create a road hazard, increasing the risk of a crash or injury.
- What to do
- Dealers will inspect and tighten the wheel assembly lug nuts, and replace the hub bearing assembly, as necessary, free of charge. Check whether your vehicle is included with its 17-character VIN.

Recall Facts (from NHTSA)
- NHTSA Campaign ID
- 26V693000
- Announced
- 2026-10-20
- Units affected
- 17
- Defect
- Hyundai Motor America (Hyundai) is recalling certain 2026 Venue, Elantra N, Elantra Hybrid, and Elantra vehicles. The wheel lug nuts may loosen and allow the wheel to detach.
- Consequence
- Wheel detachment can cause a loss of vehicle control or create a road hazard, increasing the risk of a crash or injury.
- Remedy
- Dealers will inspect and tighten the wheel assembly lug nuts, and replace the hub bearing assembly, as necessary, free of charge. Owner notification letters are expected to be mailed December 19, 2026. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 310. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on October 23, 2026.
In August 2026, after modifying its wheel-tightening tooling, Hyundai's Ulsan plant in South Korea ran a temporary manual torque process for wheel lug nuts. The controls on that process were inadequate, and some nuts left the plant short of their specified torque. A loose lug nut can back off in service, and in limited instances, Hyundai says, the wheel can separate from the car.
Hyundai filed NHTSA campaign 26V693000 on October 20, 2026, covering 17 vehicles built between August 10 and August 27: eight 2026 Venues, four 2026 Elantras, four 2026 Elantra Hybrids and one 2026 Elantra N. Hyundai's number is 310. Dealers will inspect and retighten every lug nut and replace the hub bearing assembly where needed, at no charge. Owner letters mail December 19, 2026.
Hyundai estimates that 5 percent of the population has the defect, about one car. The same plant produced 26V692, filed the same day, on front strut fasteners in the Elantra and Tucson Hybrid.
The Issue
Lug nuts hold a wheel by clamping it against the hub face, and that clamping force depends on each nut reaching its specified torque. A nut left short lets the wheel shift slightly under load, which can work the remaining nuts loose. Hyundai describes the progression as abnormal noise or vibration first, then, in limited instances, separation of the wheel.
The nut is Hyundai part 52950-14140, a hub nut assembly from Samjin Nut, the supplier also named in 26V692. As in that campaign, the remedy keeps the original part and confirms its torque. Hyundai places the fault in the temporary process, which ended on September 16, 2026.
Affected Models
| Model | Model year | Production dates | Units |
|---|---|---|---|
| Hyundai Venue | 2026 | Aug 11 - Aug 27, 2026 | 8 |
| Hyundai Elantra | 2026 | Aug 10 - Aug 24, 2026 | 4 |
| Hyundai Elantra Hybrid | 2026 | Aug 11 - Aug 13, 2026 | 4 |
| Hyundai Elantra N | 2026 | Aug 13, 2026 | 1 |
| Total | 17 |
All 17 were assembled by Hyundai Motor Company in South Korea for the U.S. market, and Hyundai's chronology places the condition at Ulsan.
Chronology and Investigation
This campaign started at the factory: Hyundai Motor Company told the North America Safety Office about the problem on September 22, 2026, and the office opened an investigation two days later. A torque survey of vehicles in the potential population, run from September 25 to October 8, found some with lug nuts below specification, and Hyundai's safety decision committee chose a recall on October 13.
Reported Incidents
As of the October 13 recall decision, Hyundai's filing records no U.S. incidents tied to the lug nuts.
Remedy and Notification
A Hyundai dealer will inspect and retighten all of the wheel lug nuts and replace the hub bearing assembly if the inspection calls for it. The work is free whether or not the car is still under the New Vehicle Limited Warranty, and Hyundai will reimburse owners who already paid to have the condition repaired.
VINs became searchable on NHTSA.gov on October 23, 2026. Owner letters mail December 19, 2026, the same date Hyundai's filing gives for notifying dealers. Hyundai attached no do-not-drive or park-outside advisory. Its customer service line is 1-855-371-9460, and the recall number is 310.
Symptoms to Watch For Before a Wheel Comes Loose
A clicking or knocking from one wheel. Hyundai lists abnormal wheel noise as the warning, and a loose wheel tends to tick or knock in time with its rotation.
Vibration that changes with speed. A wheel that has started to shift on its hub can shake the car in a way that tracks road speed rather than engine speed.
How Long Will the Recall Repair Take?
Hyundai has not yet posted dealer instructions or a labor time for campaign 310. Torquing every lug nut on a car is a matter of minutes with a torque wrench. A hub bearing replacement, which the remedy calls for only where the inspection finds damage, means removing the wheel, brake and hub on that corner and takes considerably longer.
Bottom Line
The VIN check on NHTSA.gov has been live since October 23. Anyone driving a Venue or Elantra built in August 2026 who hears a noise from a wheel should pull over and have the lug nuts checked before driving on; a tire shop can torque them on the spot, and a Hyundai dealer can confirm the VIN under recall 310.
Find your Hyundai recall information: https://www.hyundaiusa.com/campaignhome
Historical context
Affected Vehicles
| Make | Model | Years |
|---|---|---|
| Hyundai | Venue | 2026 |
| Hyundai | Elantra | 2026 |
| Hyundai | Elantra Hybrid | 2026 |
| Hyundai | Elantra N | 2026 |